China Insulating Glass Butyl Sealant

Hot Applied Butyl Sealant for Insulating Glass
Application Field:
One component,solvent free, non­fogging, permanently plastic butyl sealant , formulated for primary sealing of insulating glass units.
It can keep its plastic and sealing properties in a wide temperature range.
Excellent adhesion properties on glass, aluminum alloy, galvanized steel and stainless steel.
Minimum moisture vapour and gas permeation.
Excellent temperature stability: - 30.C to 80ºC
GLASS I SPACER - To achieve good adhesion,
the glass/ spacer surface must be clean, dry and free of any residue.
Product Introduction :
Butyl adopts the imported butylene as the main raw materials, has the strong adhesive and joint characters to IG and spacer bars, good weathering resistance, can bear high temperature, low moisture,vapor and gas transmission rate.It is the first barrier for the insulated glass sealing process. Conform to the JC/T914-2014 standard.
Parameters (according to CNAS L0690 test report):
TypeButyl SealantModelsASW-803ColorBlackUsageInsulating GlassDensity1.28g/cm³GB/T1033.1Water vapor transmissivity0.58 g/ m² /day (EN1279-4 standard : <0.8 g/ m² /day)Thermal weight loss0.24 (National standard<0.75)Solid content100%Temperature -40ºC to 150ºCExtrusion Temperature100ºC to 145ºCOperating Temperature -10ºC to 80ºCUV IrradiationJC /T 914-2014 StandardShear strength (aluminum, glass)0.21Mpa (JC/T914standard : >0.15Mpa)Changing rate after 168h UV treatment12% (JC/T914standard : <20%)Volatile content0.44 (JC/T914standard : <0.75)Needle penetration 1/10mm,( 25ºC)40 (JC/T914standard : 35-55)Needle penetration 1/10mm, (130ºC)290 (JC/T914standard : 210-330)Diameter180mmPackage7kg ( / Barrel )
Contact:
Aswiftech Co., Ltd.